Reference

Aquafaba in a formulation: balancing the water

Aquafaba carries 90 to 95% water, against about 75% in a whole egg. When you replace whole eggs, start by reducing the recipe's other liquids by 5 to 10%.

Your first egg-free sponge or brioche dough can look looser before it reaches the oven. That change often starts at the liquid balance, not at the mixing stage. Use the egg replacement amount as the fixed point, then make a controlled first adjustment to milk, water, or another liquid already in the formula.

A whole egg replacement starts at 45g of liquid aquafaba, while an egg white replacement starts at 30g. If you are replacing egg whites only, leave the other liquids unchanged. Powder is made up with water before it enters the mix, so that make-up water stays as specified. The sections below show where to remove water, how to set up the batch, and what to record.

Updated: .

How much water does aquafaba bring compared with egg?

Whole egg replacement changes the water balance because liquid aquafaba contains more water than a whole egg. Use the egg count to set the replacement amount, then adjust the other liquids as the starting move.

Starting point for 4 whole eggs
Original formulaStarting replacement
4 whole eggs180g liquid aquafaba
200 ml milk180 to 190 ml milk

For this worked example, begin the milk adjustment at 180 to 190 ml rather than changing several liquids at once. The whole egg converter helps set the swap. Use whole egg substitutes to check the egg function you are replacing.

Where do you take the water out of the formula?

Take the reduction from a liquid whose decrease you can assess in the first batch. In a milk-based sponge, milk is often the practical starting point. If the formula has more than one liquid, make the initial change in one place rather than spreading small reductions across several ingredients.

Keep the water used to make up powder exactly as given. It belongs to the powder preparation, not to the 5 to 10% reduction. Where you are replacing egg whites rather than whole eggs, leave the formula liquids unchanged. You can compare aquafaba with egg white fairly before deciding which egg function is changing.

Use the recipe converter before you issue the adjusted batch sheet.

How do you run the first trial batch?

Begin with a short product brief: what you make, expected volume, country, and format. Then request the technical sheet and certificate of analysis, and arrange a sample through a qualified enquiry. These documents are sent on request.

Run the first batch in your own formula and on the process that matters for release. For fat-rich batters, mix aquafaba with sugar before it meets fat. If the original method uses whipped egg whites, whip aquafaba and fold it in. The aquafaba baking guide covers these handling points, while aquafaba in food manufacturing puts the trial in a production context.

After you assess the batch against your criteria, move to quote and supply through the distributor for your country. You can test and order for production when the formulation is ready for that step.

What do you record so the result can be repeated?

A repeatable result starts with a batch record that lets you isolate the water change from every other process choice. Record the original formula, the egg replacement amount, the liquid removed, and whether the aquafaba was liquid or powder made up with water.

  • Ingredient order and mixing method
  • Whether sugar met aquafaba before fat
  • Whipping and folding steps, where used
  • Batch observations at the points your specification checks
  • Any formula change made after the first trial

Keep the control formula beside the adjusted version. That gives you a clear basis for the next batch and for the production record.

Start with one controlled whole egg replacement and adjust one existing liquid by the stated range. Put the original and adjusted formulas on the same batch sheet. When you are ready to run your product trial, send the product brief with what you make, volume, country, and format.

Where to buy VERY AQUAFABA

Winner, Sirha Europain Awards, Sirha Bake & Snack 2024

Get VERY AQUAFABA

Where will you use VERY AQUAFABA?

Frequently asked questions

How much liquid should I remove when I replace whole eggs in my formula?

Start by reducing the recipe's other liquids by 5 to 10%. For 200 ml of milk, the starting range is 180 to 190 ml. Keep this as a first trial adjustment, then record what changes in your product.

When should I leave the other liquids unchanged?

If you replace egg whites only, leave the other liquids as they are. The water adjustment described here applies when whole eggs are replaced.

How do I use aquafaba powder without adding unplanned water?

Make powder up with water before it goes into the formula, never add it dry. Use 2g with 30 ml water per egg white, or 3g with 45 ml water per whole egg. That make-up water stays as specified.

Where should I add aquafaba in a fat-rich batter?

Mix aquafaba with sugar before it meets the fat. This order applies to fat-rich batters. If the original formula depends on whipped egg whites, whip aquafaba and fold it in.

What do I need to record from my first egg-free batch?

Write down the replacement amount, the liquid you removed, ingredient order, and mixing method. Note whether you used liquid or made-up powder, as well as observations at each point your specification checks. Keep the original and adjusted formulas together.

How do I take my aquafaba formulation from trial to production?

Start by sharing what you make, expected volume, country, and format. A qualified enquiry can lead to the technical sheet, certificate of analysis, and a sample for a product trial. After you assess the trial against your criteria, quote and supply proceed through the distributor for your country.

skip the cans, go pro

Switch to VERY AQUAFABA, the ready-to-use professional solution

Aquafaba powder
Aquafaba powder supplier : packs for individual use and bulk professional kitchens

Easy to store and measure, best for factories, bakeries and professional kitchens.

Liquid aquafaba
Aquafaba liquis supplier : packs for individual use and bulk professional kitchens

Ready to pour and use, perfect for bakeries, bars, and kitchens.