Professionals

Aquafaba in bakery: how to test it in your recipes

Start with the recipe you sell most, replace each egg at 45g per whole egg or 30g per white, and bake it beside your current version. For the morning sponge that has to look the same on Monday and Friday, this keeps the comparison close to the product your line already knows. Use the same handling and oven program. Keep formula changes limited to the egg replacement and, where needed, the water adjustment.

Set the question before mixing: are you checking volume, crumb, slice, shell, or a combination? Cakes, whipped sponges and meringues use aquafaba differently, so give each product its own test plan. We recommend starting with one commercial recipe, recording the change, and agreeing how the finished bake will be judged.

Updated: .

Winner, Sirha Europain Awards, Sirha Bake & Snack 2024

Which recipe do you test first?

Start with the recipe you sell most. A whole-egg cake, a sponge built on whipped whites and a meringue each need a different handling check, so keep the first trial to one egg role.

When whole eggs are replaced, aquafaba brings more water into the formula. Start by reducing the other liquids by 5 to 10%, then assess the baked result against your own criteria. If you use aquafaba powder, make it up before mixing. It goes into the bowl as liquid, never dry.

How do you set up the trial bake?

Set a control bake beside the aquafaba version. Keep the ingredient list, pan, deposit, oven program and cooling routine aligned, then record the actual change. In fat-rich batter, mix aquafaba with sugar before it meets the fat. For a recipe built on whipped egg whites, chill it to 4 to 6 °C, whip it, then fold it in.

RecordWhat to note
BatchControl or aquafaba trial
ChangeEgg replacement and liquid adjustment
OvenProgram used for both bakes
Finished resultOutcome against your agreed criteria

What do you compare on the finished product?

Judge both bakes at the same point in your process, rather than relying on the bowl alone. Set the criteria before production starts so the same observations can be recorded for each batch.

  • Volume and appearance after cooling
  • Crumb structure, cut and slice condition
  • Shell condition for meringues
  • Handling during packing and on the line
  • Taste and aroma in the finished recipe

Keep notes tied to the product you sell. A sponge may need close attention at cutting, while a meringue may need a separate shell and drying check. Record the result against the control, not against a general expectation.

What do you need before scaling up?

Repeat the trial when the first bake raises a question or when the finished result needs another check. Move forward after the recipe has been trialed against your criteria and you have a record of the outcome.

We work through exploration, specification, a trial in your product, then quote and supply after a validated trial through the distributor for your country. At specification, ask for the technical sheet and certificate of analysis. Set the recipe version, acceptance checks and process sheet before placing a production order.

Choose the recipe you sell most and write the criteria you will use before mixing. Run the control and aquafaba bakes under the same oven program, complete the record, then repeat the trial if the result raises a question. When you are ready to discuss specification and a sample, send an enquiry.

Where to buy VERY AQUAFABA

Winner, Sirha Europain Awards, Sirha Bake & Snack 2024

Get VERY AQUAFABA

Where will you use VERY AQUAFABA?

Frequently asked questions

How do I choose the first recipe for my aquafaba bakery trial?

Start with the recipe you sell most and bake it beside its current version. Keep the first trial focused on one egg role, such as whole eggs in a cake or whipped whites in a sponge.

How much aquafaba do I use when I replace eggs in a cake?

Use 45g of liquid aquafaba for one whole egg and 30g for one egg white. Where a yolk's richness is needed, use 15g of aquafaba plus 10g of oil for one yolk.

How do I adjust water when I replace whole eggs with aquafaba?

Aquafaba is 90 to 95% water, while a whole egg is about 75% water. Start by reducing the other liquids in the formula by 5 to 10%, then assess the baked product against your criteria.

How do I handle aquafaba in a whipped sponge or meringue?

For a whipped sponge, chill the aquafaba to 4 to 6 °C, whip it, then fold it into the recipe. For meringues, use 150g of aquafaba with 150g of sugar, chill to 4 °C, whip for 3 to 5 minutes, then bake at 90 °C for 1.5 to 2 hours.

How do I compare an aquafaba bake with my existing product?

Bake a control and an aquafaba version under the same oven program and cooling routine. Compare the results using agreed checks such as volume, crumb, cut, shell condition, packing handling, taste and aroma.

What do I need before I scale an aquafaba bakery recipe?

You need a repeatable trial result, clear acceptance checks and the recipe version you intend to run. Before ordering for production, review the technical sheet and certificate of analysis, then confirm the supply route for your country.

skip the cans, go pro

Switch to VERY AQUAFABA, the ready-to-use professional solution

Aquafaba powder
Aquafaba powder supplier : packs for individual use and bulk professional kitchens

Easy to store and measure, best for factories, bakeries and professional kitchens.

Liquid aquafaba
Aquafaba liquis supplier : packs for individual use and bulk professional kitchens

Ready to pour and use, perfect for bakeries, bars, and kitchens.