Professionals
How to prepare aquafaba cocktails for a large banquet
A welcome sour for 300 guests takes 6L of aquafaba at 20 ml per drink, so set aside six 1L Tetrapaks. Pre-batch the spirit, citrus and syrup, then add aquafaba only when you shake each drink.
When the doors open and welcome drinks start leaving the bar, repeatable handling matters more than changing the sour recipe. Set the guest count, then separate the base from the foamer, so the shake station has one measured pour for every order. Plan 2L for 100 welcome sours, 4L for 200 and 6L for 300, and decide before service what happens to liquid left in opened cartons.
Updated: .

How many cocktails do you plan for?
Set your count around one welcome sour per guest, then reserve 20 ml of aquafaba for each drink. A 1L Tetrapak makes 50 drinks, which gives you a direct check before the banquet begins. This count assumes each guest receives one welcome sour.
| Guests | Aquafaba | 1L Tetrapaks |
|---|---|---|
| 100 | 2L | 2 |
| 200 | 4L | 4 |
| 300 | 6L | 6 |
Use the event cocktail calculator when the guest count or number of serves changes. Keep the needed cartons with the bar stock before the first shake. Use the same count for catering and events, including banquet orders handled through hotel bars.
How do you prepare the bases ahead?
Build the sour base from the spirit, citrus and syrup before the banquet. Keep aquafaba out of that batch. It belongs in the shaker as a separate measured 20 ml pour.
Write the base pour and aquafaba measure on the station build. Make one drink using that sequence before service begins, so the glassware, ice and shaking order are clear. Then use the same build for every welcome sour.
This split keeps the pre-batch focused on its three ingredients. It also means each shaker receives aquafaba immediately before the dry shake. Use the same order when you pre-batch your sours for more than one bar.
How do you run the shake at the banquet?
Arrange the station so each drink follows one order: pour the pre-batched base, measure 20 ml of aquafaba, and begin the dry shake. Do not put the aquafaba into the batch. The separate measure keeps the foamer at the part of the process where it is used.
Dry shake without ice for 10 to 15 seconds. Add ice, then shake for another 10 to 15 seconds. Strain the drink into the glass your bar already serves its sours in.
Keep a jigger on each active shake position. A written build beside the shakers helps the bartender follow the same dry-shake and ice-shake sequence through welcome service.
What do you do with the open cartons after?
Mark each opened carton with the opening date and hold it at 2 to 6 °C. Opened liquid keeps for 3 to 4 days. Keep unopened liquid at room temperature until you need it, it keeps at least 12 months.
If a banquet leaves liquid that you will not use within that window, freeze aquafaba at −18 °C or lower in 30g or 50g portions. Thaw portions overnight in a refrigerator at 2 to 6 °C. Do not refreeze thawed aquafaba.
Portioning gives you a measured amount ready for later service. Match the stored portion to the 20 ml drink measure before you add it to the shaker.
Write down the welcome-sour count, map the base and aquafaba pours on the station build, and run one service check before the banquet. If you need help choosing a format for that count or for more than one bar, send an enquiry with the guest number.
Where to buy VERY AQUAFABA


