Professionals
How to standardize aquafaba cocktails across hotel bars
At the rooftop, lobby and restaurant bars, standardize every sour with one written specification: 20 ml of aquafaba per drink by jigger, and the same shake in every outlet. That gives the pisco sour served all evening, the whiskey sour between check-ins and the dinner service sour one operating rule.
Tie that rule to the station, not to whoever is working it. Write the measure, the shake order and the batch boundary where each bar can check them before service and at handover. Pre-batch the spirit, citrus and syrup when it suits service, then add aquafaba only at the shake. The rest is control: forecast each outlet separately, protect opened liquid with a date mark, and send one combined order for the hotel.
Updated: .

How do you write one cocktail specification for every bar?
Give each bar the same master specification, written so a bartender can follow it without interpretation. For every sour, list the specified spirit, citrus and syrup, then state 20 ml aquafaba, measured by jigger. Keep aquafaba as its own line, rather than a variable note.
Write the shake as two moves: dry shake for 10 to 15 seconds without ice, then shake for 10 to 15 seconds with ice. Pre-batch the spirit, citrus and syrup, but add aquafaba at the shake, never in the batch. Use the same drink name and check points at every station, so a rooftop pisco sour and a lobby whiskey sour follow the same control.
How much aquafaba should you stock at each bar?
Plan stock by outlet forecast, not only by the hotel total. The figures below are an example for one busy evening. They show how three distinct service patterns can add up to one 1L Tetrapak.
| Outlet | Example sours | Aquafaba at 20 ml each |
|---|---|---|
| Rooftop bar, pisco sour | 25 | 500 ml |
| Lobby bar, whiskey sour | 15 | 300 ml |
| Restaurant bar, whiskey sour | 10 | 200 ml |
| Total | 50 | 1L |
One 1L Tetrapak makes 50 drinks at 20 ml each. If a quieter bar is unlikely to finish an opened carton within 3 to 4 days, it can work from powder made up as needed. Mix 2g powder with 30 ml water to make 32g of aquafaba, then use the same 20 ml measure.
How do you prepare the bars before service?
Run a short record before each service instead of relying on verbal handover. The record makes the opening date, cold holding and station setup visible to whichever bartender starts the shift.
| Check | Record |
|---|---|
| Liquid aquafaba | Opening date marked |
| Storage | 2 to 6 °C |
| Jigger | 20 ml measure ready |
| Pre-batch | Spirit, citrus and syrup only |
| Shake procedure | Dry shake, then shake with ice |
Keep opened liquid at 2 to 6 °C and use it within 3 to 4 days. For a pre-batched sour, confirm aquafaba is not in the bottle or jug. The dry shake comes first, without ice, before the ice shake.
How do you manage one hotel-wide order?
Bring demand together for ordering, but keep the outlet split in the request. State which bar needs liquid, which may use powder, and the expected monthly volume for every outlet. This gives the rooftop, lobby and restaurant bar a visible place in one hotel-wide order.
Send an enquiry with your country, outlets, expected monthly volume and formats. We serve every country through distributors and reply within two working days. Keep the bar forecasts beside the order so you can review the format mix before sending it.
List the rooftop, lobby and restaurant bar separately, with each outlet’s expected monthly volume and preferred format. Add your country, then send one hotel-wide enquiry. We can use those details to route the request through the relevant distributor and reply within two working days.
Where to buy VERY AQUAFABA


