Professionals
Mixing order for foamed drinks
Build a foamed cocktail in this order: noncarbonated ingredients, aquafaba, a dry shake, ice, a second shake, then the carbonated top in the glass. At a packed station, keeping that order stops you from reaching for tonic or ice before the foam has had its first shake.
Put spirit, citrus, syrup, and other still ingredients in the tin. Measure 20 ml of VERY AQUAFABA with a jigger, then dry shake for 10 to 15 seconds. Add ice and shake again for 10 to 15 seconds. Strain before you top a Gin Fizz with tonic water or The Sunset with ginger beer. The order is simple enough for a station card and keeps the work in the tin separate from the final build in the glass.
Updated: .

What goes into the tin first?
When the ticket lands, begin with every ingredient that is meant to be shaken and has no carbonation. Measure the spirit, citrus, syrup, and any still modifier into the tin. This is also the point to use a pre-batched spirit, citrus, and syrup base if that is how you build sours.
A Gin Fizz gives you a clear station check: 40 ml gin, 20 ml lemon juice, and 20 ml cane syrup go in before the foamer. Keep tonic water away from the tin. Ice waits until after the dry shake, so the first shake works only the liquid ingredients and aquafaba.
When does the aquafaba go in?
Add aquafaba once the base is measured and immediately before the dry shake. Measure 20 ml with a jigger for each drink. This puts the foamer into the shaker at the point where it is ready to be worked with the rest of the liquid.
Pre-batch the spirit, citrus, and syrup, not the aquafaba. Add it during each build instead. Whether you are working from a bottled sour base or measuring each ingredient to order, the aquafaba belongs at the shake. Keep that step visible on the station so it does not get added after ice.
Why does the dry shake come before the ice?
The dry shake comes first because ice does not interrupt the first agitation of aquafaba with the other ingredients. It gives you a defined stage for combining the foamer with the sour base before chilling and dilution begin.
Dry shake without ice for 10 to 15 seconds. Then add ice and shake for another 10 to 15 seconds. Treat these as two separate checks in the build. If ice enters the tin first, you have skipped the dry stage rather than changing its order.
Where do the carbonated tops go?
Carbonated tops belong in the glass after the shaken drink has been strained. Carbonated ingredients are never shaken. For a Gin Fizz, strain into a highball and top with tonic water. For The Sunset, strain into a highball and top with ginger beer.
Keep the top separate from the shaker sequence. It is the final build step, not another ingredient for the tin. That distinction makes the move from shaking to serving clear when you are switching between sours and long drinks during service.
Write the sequence on your shaker station: still ingredients, 20 ml aquafaba, dry shake, ice shake, strain, then top. Run it through the next Gin Fizz or Sunset build and check that the carbonated ingredient never reaches the tin. If you need ready-made aquafaba for that workflow, send an enquiry.
Where to buy VERY AQUAFABA


