Professionals
How to use aquafaba with bottled sour bases
Bottle the spirit, citrus and syrup, then add 20 ml of VERY AQUAFABA at the shake. Keep aquafaba out of the bottled sour base, because it is added only when you finish each drink.
At the prep bench, you can bottle a base for later service while keeping one measured foamer step at the station. For 40 pisco sours, that is 1,600 ml of pisco, 800 ml of fresh lime juice and 800 ml of aquafaba. Bottle the pisco, lime and syrup under your own process, then portion the aquafaba for service. This keeps the bottle focused on the sour base and gives the bartender a clear final step. Use the same split when you write the bottle label, service spec and storage instructions.
Updated: .

What goes in the bottle, and what stays out?
Your bottled sour base contains the spirit, citrus and syrup chosen for that drink. VERY AQUAFABA stays separate until service. It is not part of a shelf-stable drink, and it should not go into the bottle when you make the batch.
Give the base bottle the drink name and keep the foamer instruction beside it. The person bottling the base can follow the production spec, while the bartender measures aquafaba into the shaker for every serve. The pack has a light roasted note, but that note disappears once it is shaken into a drink. If you are building repeatable prep, use the same separation when you pre-batch your sours.
How do you finish the drink at service?
Pour the portion of bottled sour base set by your own drink spec into a shaker. Measure 20 ml of VERY AQUAFABA with a jigger, then dry shake for 10 to 15 seconds without ice. Add ice and shake again for 10 to 15 seconds.
The aquafaba belongs in the shaker before the dry shake, not in the prepared bottle. Keep that instruction visible where the drink is finished, especially when the base moves from a prep area to a service station. A clear mixing order for foamed drinks gives the person making the serve the same sequence every time. A 1L Tetrapak provides 50 measured cocktail serves at 20 ml each.
How do you label and store the base?
Write the base name, its ingredients, its preparation date and your handling instructions on the bottle. Make it clear that the bottle holds the spirit, citrus and syrup base, while aquafaba is added at the shake. Follow your own food-safety rules for the bottled base and its service window.
Keep a separate opened-date mark on the aquafaba used at the station. Opened liquid keeps for 3 to 4 days at 2 to 6 °C. Unopened liquid and powder keep for at least 12 months at room temperature. If you need production documentation for your process, the technical sheet and certificate of analysis are available on request.
When is a bottled base worth it?
A bottled base can suit you when the same sour is prepared repeatedly and you want the batching work completed before service. It separates the bottle preparation from the final shake, without putting aquafaba into the packaged base. The method also gives drinks producers a clear distinction between the bottle formula and the finished-drink procedure.
Start with one sour that you already make often. Record the base formula, the bottle label and the station instruction to add 20 ml of aquafaba. If the format is moving into larger production, build a co-packer brief around that split. You can also review aquafaba for drinks producers before deciding how the foamer step fits your bottling process.
Take one current sour and write its base formula, bottle label and station instructions on one sheet. Keep the aquafaba step separate, with 20 ml and the two shakes stated plainly. If you want to check that workflow against your own format, request a drinks trial or send an enquiry.
Where to buy VERY AQUAFABA


