Aquafaba powder
Aquafaba powder for marshmallows
With the syrup climbing toward 121 °C, one marshmallow batch needs 100g of aquafaba ready to whip. Make up 7g of powder with 105 ml of water, then weigh 100g for the batch. Set out that made-up aquafaba before the syrup reaches temperature.
Keep the powder and water beside the scale before you start the syrup, and make up only the aquafaba the batch needs. That measured preparation keeps the quantity clear whether you are setting one frame or planning several, so pouch choice follows your planned batch count on the bench. Our coconut recipe combines whipped aquafaba with cooked syrup and a carrageenan gel, has 35g of toasted coconut in the mix, pours syrup at 95 °C, holds the gel at 80 °C, and sets the mixture in a frame, with coconut listed as a nut in the recipe.
Updated: .
How much powder does one marshmallow batch take?
Start from the finished aquafaba weight, not the dry powder weight. Our marshmallow recipe uses 100g of aquafaba in each batch. Make up 7g of powder with 105 ml of water to produce 112g, then weigh 100g into the mixture.
That 100g is just over three egg whites' worth. Keep the powder measurement and the made-up aquafaba measurement separate on your production sheet. The powder is the starting ingredient, while the made-up aquafaba is the quantity that goes into the marshmallow formula. Measure the syrup, gel and other ingredients against the recipe you are making.
When do you make up the powder in the method?
Make up the powder with water before the syrup reaches its cooking temperature. In the coconut marshmallow recipe, the syrup cooks to 121 °C and is poured at 95 °C, so the aquafaba should already be measured and ready to whip while the pan is on the heat.
Add the powder to water first. Never put it dry into the mixing bowl. Make up the amount required for the batch, then use the weighed aquafaba in the method. The coconut recipe also includes a carrageenan gel held at 80 °C.
How do you plan several frames?
Start the frame plan with 100g of aquafaba for every batch you intend to set. Then choose the pouch from the number of batches in the run. A 30g pouch covers four marshmallow batches, while a 200g pouch covers 28 batches.
Keep the batch count beside the number of frames so the aquafaba is measured before production starts. The coconut version has 35g of toasted coconut in the mix and is set in a frame. Coconut is listed as a nut in that recipe, so retain that ingredient note with the batch record. Each batch begins with the same 100g aquafaba requirement.
Which pouch suits a confectionery bench?
Choose the pouch from the number of marshmallow batches you have planned. A 30g pouch covers four batches, which suits a shorter run. A 200g pouch covers 28 batches. When you make up a full 200g pouch, it takes 3L of water and makes 3.2kg of aquafaba.
A full 3kg pouch takes 45L of water and makes 48kg of aquafaba, so choose it when your planned production matches that make-up volume. Unopened powder keeps for at least 12 months at room temperature. Once opened, keep the pouch dry and closed until its best-before date.
Count the frames you have planned, using 100g of aquafaba for each batch. Set aside 7g of powder and 105 ml of water per batch, then choose a pouch that covers that run. Make up the aquafaba before the syrup approaches 121 °C.
Where to buy VERY AQUAFABA


